Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ FSIC mortise length ”

RELATED FAQS

Question
Answer
What cylinder length options are available?
There are different mortise cylinder length options depending on the cylinder type. Below is a list of available options for conventional, FSIC, and SFIC cylinders, as well as the convent...
What cylinder length do you use for escutcheon trim for the L series mortise lock?
Typically for a 1-3/4" door you would use a 1-1/4" cylinder.  Use the Table in the Pricebook for a reference:  
Mortise cylinder with switch.
These cylinders are designed with a microswitch attached to the back of the cylinder. The switch is operated by a cam when the key is rotated.   To order: XB09-195 Mort...
The XB09-195, XB09-795, and XQ11-804 are basically modified mortise cylinders. The overall length of the mortise cylinder switch is approximately 1-9/16" (1.563"). The diameter of the cylinder face...
Why is the plug pulling out of the FSIC 23-030 mortise housing?
ISSUE: After some use the plug will begin to project from the cylinder face and will ultimately pull completely out. ROOT CAUSE: In a dogged application the cam was rotated 180 degrees which ...