Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ FSIC MORTISE HOUSING LESS CORE ”

Resolution: This only applies to the full size interchangeable cores. The SFIC mortise cylinders have part numbers for housings with construction cores (Disposable and Keyed). Simply add (-ICX) to the end o...:

Will the SFIC mortise housing accept both six and seven pin cores?

Resolution: Yes. Both Schlage and Falcon SFIC mortise housings will accept 6 and 7 pin cores with no additional parts.:

What cylinder length options are available?

Resolution: There are different mortise cylinder length options depending on the cylinder type. Below is a list of available options for conventional, FSIC, and SFIC cylinders, as well as the convent...:

Why is the plug pulling out of the FSIC 23-030 mortise housing?

Resolution: ISSUE: After some use the plug will begin to project from the cylinder face and will ultimately pull completely out. ROOT CAUSE: In a dogged application the cam was rotated 180 degrees which ...:

What is the standard FSIC mortise housing with a straight cam?

Resolution: 20-059 is the standard straight cam FSIC housing only used with Von Duprin, Monarch, and other straight cam applications. 30-032 is the straight cam FSIC housing only for the outside of the Schl...:

Does Schlage offer a Rim cylinder FSIC housing less core?

Resolution: Rim cylinder housing only for SFIC is part number 80-129.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ FSIC MORTISE HOUSING LESS CORE ”

RELATED FAQS