Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ FSIC mortise cylinder cam driver ”

Resolution: Effective July, 2014, there is no longer a specific modular cam part number for dogging. The Schlage modular straight cams come with two mounting holes that allow for the cams to be mounted inverte...:

Can the modular cams be used on the older cylinders?

Resolution: The cams for modular cylinders are unique and are not compatible with any non-modular mortise cylinders, Schlage or any competitors.:

What Schlage cam will operate Sargent locks?

Resolution: Click here for a list of available Schlage cams comparable to the Sargent 13-0660. :

Does the Von Duprin CD kit include the machined cover plate for the cylinder?

Resolution: The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...:

What cam to use for a modular cylinder in Sargent mortise lock?

Resolution: The Sargent cams listed below work for all applications except 16 inside and 50 outside. The equivalent Sargent cam is the 13-0660. Use the B520-736 for modular cylinder lengths of 1 1/8",...:

What type of cylinder is the 20-001?

Resolution: The 20-001 is a conventional mortise cylinder with a straight cam, compression ring and spring for use on rose trim. For use with the L9060 outside cylinder or other straight cam applications.:

What cylinder do I use on a Von Duprin Keyed Removable Mullion?

Resolution: see installations instructions here :

What is the standard Falcon cam?

Resolution: Cams for other applications may be specified with no additional charge, see pricebook.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ FSIC mortise cylinder cam driver ”

RELATED FAQS