Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ FSIC housing finish ”

Resolution: There are different mortise cylinder length options depending on the cylinder type. Below is a list of available options for conventional, FSIC, and SFIC cylinders, as well as the convent...:

Does Schlage offer a Rim cylinder FSIC housing less core?

Resolution: Rim cylinder housing only for SFIC is part number 80-129.:

What is the standard FSIC mortise housing with a straight cam?

Resolution: 20-059 is the standard straight cam FSIC housing only used with Von Duprin, Monarch, and other straight cam applications. 30-032 is the straight cam FSIC housing only for the outside of the Schl...:

Why is the plug pulling out of the FSIC 23-030 mortise housing?

Resolution: ISSUE: After some use the plug will begin to project from the cylinder face and will ultimately pull completely out. ROOT CAUSE: In a dogged application the cam was rotated 180 degrees which ...:

Does the Schlage SFIC rim housings accept both 6 and 7 pin IC cores?

Resolution: The Schlage small format interchangeable core rim cylinders 80-329, 80-159, 80-116, and 08-129 can accept 6 pin and 7 pin small format cores.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ FSIC housing finish ”

RELATED FAQS