Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ FSIC control pin sticking ”

Resolution: ISSUE: After some use the plug will begin to project from the cylinder face and will ultimately pull completely out. ROOT CAUSE: In a dogged application the cam was rotated 180 degrees which ...:

What is the part number for a control pin for a 23-030?

Resolution: There are two parts that can be referred to as control pins for a 23-030 (FSIC core).C603-967 is the lower control pin that sits in the seventh hole of the FSIC plug. (part B in exploded view) ...:

Falcon 19 R is sticking when I use the 914 KIL trim.

Resolution: First, make sure the device is being tested while it is mounted to the door with trim installed. (Testing the device on the bench may show behaviors that will not occur once the d...:

Does Schlage offer a 7 pin FSIC?

Resolution: The Schlage Full Size IC core is 6 pin only. :

What is the part number for a full size interchangeable core control key?

Resolution: Classic Conventional Key Blanks and Cut Keys Part Number Description Key Blanks 35-056 Control Standard bow, embossed both sides 35-076 Standard bow, unembossed both s...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ FSIC control pin sticking ”

RELATED FAQS