FSIC cap pin

RELATED FAQS

Question
Answer
The UL fire label is only applied to the device center case cover at the factory when the device is built.  This label can not be sold or replaced with a new one.
Only the black plastic end caps are available for the 22 series exit devices.
When factory installed on GrainTech® doors: Finish Stain - YES, top caps, bottom caps and astragals are stained (prior to attachment) to match the GrainTech® door finish. GrainTech® Steel - NO, t...
The Schlage Full Size IC core is 6 pin only. 
The 40-100 is a multiple tailpiece pack with a pre-assembled, 0-bitted, key-in-knob cylinder.  The kit includes the following: (1) Pre-assembled cylinder 0-bitted, less tailpiece 40-100 (...
The pack is available in all keyways, Everest and Classic families including restricted keyways except Primus. 
ISSUE: After some use the plug will begin to project from the cylinder face and will ultimately pull completely out. ROOT CAUSE: In a dogged application the cam was rotated 180 degrees which ...
The old end cap for 33/35 is no longer available, use the new end cap part number 050014-xx.