Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ fire rated door latching ”

Resolution: Installation should be 6" from bottom of the door. See attached templates as reference. T-5494 for HM Doors W-5494 for Wood Doors:

Is the Von Duprin Guard-X exit device fire rated?

Resolution: The Von Duprin Guard-X exit device is not fire rated because the deadbolt is not spring loaded. Therefore, there would be no positive latching as required on a fire rated opening. :

Is the Von Duprin 6223 fire rated for pairs of wood doors?

Resolution: The 6223-FSE electric strike is fire rated for pairs of wood doors, but check with wood door manufacturer to see if they have been approved for this application.:

Can 5100 electric strikebe used on fire rated door?

Resolution: The Von Duprin 5100 electric strike is not for fire rated applications.:

Can the electric strike be used with a vertical rod device on a fire-rated door?

Resolution: Not for use in fire rated openings.:

What is the largest diameter hole that Steelcraft can provide for viewer preps?

Resolution: Non fire rated doors can be furnished with a maximum 3" diameter hole for viewer preparations.Fire rated doors have a 3/4" maximum holes size unless otherwise listed by UL or ITS/WHI. Viewers must ...:

Which strike do you use with an XP98/99 device?

Resolution: The 1609 strike cannot be used with Von Duprin XP98/99 exit device.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ fire rated door latching ”

RELATED FAQS