Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ falcon mortise cyls type cams ”

RELATED FAQS

Resolution: Cams for other applications may be specified with no additional charge, see pricebook.:

Does the Von Duprin CD kit include the machined cover plate for the cylinder?

Resolution: The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...:

What is the part number for a Schlage cam to operate a Corbin lock?

Resolution: Schlage offers several Corbin Russwin competitor cams. The left most column in the image below describes what Corbin function the cam is used on and the additional columns show Modular,...:

What is the part number for the dogged cam used in modular cylinders?

Resolution: Effective July, 2014, there is no longer a specific modular cam part number for dogging. The Schlage modular straight cams come with two mounting holes that allow for the cams to be mounted inverte...:

Can the modular cams be used on the older cylinders?

Resolution: The cams for modular cylinders are unique and are not compatible with any non-modular mortise cylinders, Schlage or any competitors.:

What Schlage cam will operate Sargent locks?

Resolution: Click here for a list of available Schlage cams comparable to the Sargent 13-0660. :

What mortise cylinder cam is needed for KR4023?

Resolution: The KR4023 mullion requires a 1-1/4" mortise cylinder with straight cam. This is stated in box 7 on the first page of the KR4023 mullion instructions.:

What is the standard FSIC mortise housing with a straight cam?

Resolution: 20-059 is the standard straight cam FSIC housing only used with Von Duprin, Monarch, and other straight cam applications. 30-032 is the straight cam FSIC housing only for the outside of the Schl...: