Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Falcon Mortise Cylinder Cam Info ”

RELATED FAQS

Resolution: Cams for other applications may be specified with no additional charge, see pricebook.:

What is the part number for the dogged cam used in modular cylinders?

Resolution: Effective July, 2014, there is no longer a specific modular cam part number for dogging. The Schlage modular straight cams come with two mounting holes that allow for the cams to be mounted inverte...:

What type of cylinder is the 20-001?

Resolution: The 20-001 is a conventional mortise cylinder with a straight cam, compression ring and spring for use on rose trim. For use with the L9060 outside cylinder or other straight cam applications.:

Does the Von Duprin CD kit include the machined cover plate for the cylinder?

Resolution: The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...:

What Schlage cam will operate Sargent locks?

Resolution: Click here for a list of available Schlage cams comparable to the Sargent 13-0660. :

What cylinder do I use on a Von Duprin Keyed Removable Mullion?

Resolution: instructions:

What mortise cylinder cam is needed for KR4023?

Resolution: The KR4023 mullion requires a 1-1/4" mortise cylinder with straight cam. This is stated in box 7 on the first page of the KR4023 mullion instructions.: