Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ FALCON IC STRAIGHT CAM ”

RELATED FAQS

Question
Answer
What is the Falcon cam designation for use on 25 series trims?
For standard (non-IC) cylinders, use the Falcon #4 straight cam For IC cylinders, use the Falcon #5 cam 
What non IC cam is offered by Schlage to work in a Falcon MA lock?
Schlage now offers modular style cams to operate the Falcon MA locks.  The following part numbers are cams for all MA locks (except the MA381): L583-638 for 1-1/8", 1-3/8", 1-5/8" length cylin...
Price Book 72A List Price $8.10
What is the standard Falcon cam?
Unless otherwise specified on an order, the cam supplied on Falcon mortise cylinders will be the following: Non-IC mortise cylinder is the 5622-STD. IC mortise cylinder is the 5622-IC. Related...
Cams for other applications may be specified with no additional charge, see pricebook.
What is the part number for the dogged cam used in modular cylinders?
Effective July, 2014, there is no longer a specific modular cam part number for dogging. The Schlage modular straight cams come with two mounting holes that allow for the cams to be mounted inverte...
What cams do we use on the L9060?
The straight cam should be installed on the outside cylinder and the clover cam on the inside.
What is the standard FSIC mortise housing with a straight cam?
20-059 is the standard straight cam FSIC housing only used with Von Duprin, Monarch, and other straight cam applications. 30-032 is the straight cam FSIC housing only for the outside of the Schl...
What cam do Schlage mortise locks use?
The Schlage L-Series uses a clover leaf cam with the exception of the L9060 outside cylinder which uses a straight cam. The cam part number will depend on the type of mortise cylinder, keyway (for ...