Falcon contruction keying

RELATED FAQS

Question
Answer
 See tables below for available punches.   KEY SECTION  BLUE PUNCH   Everest S*, C*, & Classic/Obverse*  40-075   Everest T* & ...
Falcon D series deadbolts will not accept Schlage Key-in-lever cylinders. The faceplate plug hole is smaller in diameter than the Schlage plug and does not fit flush when i...
For a Schlage "C"  keyway:  Specify "CP6" as the cylinder suffix when ordering  D100 or D200 locks (All other Schlage keyways are not available).
Falcon Standard Bitting Specs - 018 system Falcon Restricted Bitting Specs - 025 system
The hex dogging key size for all Falcon-Monarch exit devices is 7/32".
All lock cylinders on a specific project are operable by a special "project key".  Duplicates of this key may be assigned by the building contractor to workmen and subcontractors as required. ...
The standard cylinder keyway that comes with the 914KIL trim is a Schlage 6 pin "C" section.
A PO from a distributor with a letter of authorization from the end user.