Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
falcon construction cuts
”
RELATED FAQS
Question
Answer
Can the Falcon 25-V be cut to fit on a 2' door?
Resolution:
The standard Falcon 25V vertical rod cannot be cut to fit on a 2 feet door opening. This device requires 2' 7 1/8" minimum door opening. Falcon offers a device that can be used on a 2 feet doo...:
Can the XX-V, 19-V, 24-V or 25-V extension rod be used on the bottom rod?
Resolution:
The extension rod could be used either on the top or bottom rods.:
What is Blockokey keying?
Resolution:
All lock cylinders on a specific project are operable by a special "project key". Duplicates of this key may be assigned by the building contractor to workmen and subcontractors as required...:
How do I cut a door to accept a Falcon W series lock?
Resolution:
For W lock levers, you can choose whether or not to install the mounting posts. This will also affect how the door is prepped so be sure to determine how you will install the locks befor...:
What punches are available to cut keys?
Resolution:
See tables below for available punches. KEY SECTION BLUE PUNCH Everest S*, C*, & Classic/Obverse* 40-075 Everest T* & ...: