Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ El wiring runs ”

RELATED FAQS

Question
Answer
What wire gauge and run is recommended for Von Duprin electric latch retraction EL device?
  For Product Shipped Prior to August 2012 using the old (black) potted module: a.       0-100 ft 14 gauge wire b.      0-200 ft 12...
 
What size wire and run is recommended when using a PS914-2RS?
For Product Shipped Prior to August 2012 using the old (black) potted module:a.       0-100 ft 14 gauge wireb.      0-200 ft 12 gauge wire&nbs...
What is the power output of a 4600 operator?
The 4600 Series operator has both a 12VDC and 24VDC output rated at 1A (combined load) to power strikes, maglocks, and other devices, but an EL device "always" has to have a separate PS914-2RS Seri...
Does the wire size of an EPT affect the operation of an EL device?
Since most wire transfer devices such as an EPT or electric hinges cannot provide large gauge wires, we take the small gauge wire into account when determining the overall wire size for the device....
Is there a wiring diagram for EL and Von Duprin PS914-2RS power supply?
Reference The 914 Installation instructions.
Are the EL wiring harnesses still required with the new potted module?
EL wiring harness is no longer needed with new EL potted modules.
Does the QEL device come with the EL wiring assembly?
Yes, the QEL device includes a cable assembly part number 110388-00.Since 12/2014, that cable comes in a package (part 116549) with the long cable mentioned above and the small cable that plug...
What is the part number for EL Wiring Adaptor?
Products shipped on or after August 8, 2012 no longer require the EL wiring adaptor.
  The part number for EL wiring adaptor is 44486876-00.  The part number contains two adaptors.