Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ EL Device with FSE ”

Resolution: Some transformers in the power supplies provide a little humming noise and that is normal. If the humming in Von Duprin PS873 power supply is loud follow these steps. Remove the load from the outp...:

What size wire and run is recommended when using a PS914-2RS?

Resolution: For Product Shipped Prior to August 2012 using the old (black) potted module:a. 0-100 ft 14 gauge wireb. 0-200 ft 12 gauge wire&nbs...:

What is the power output of a 4600 operator?

Resolution: The 4600 Series operator has both a 12VDC and 24VDC output rated at 1A (combined load) to power strikes, maglocks, and other devices, but an EL device must have a separate Power Supply for motorize...:

Is the 900-ELK wiring adaptor required when using the PS914 power supplies?

Resolution: Products shipped on or after August 8, 2012 no longer require the EL wiring adaptor. The ELK Wiring Adaptor (900ELK) was used only when using the PS914 power supply with either the 900-2RS or...:

Does the cylinder cam get inverted on the SD option for the Von Duprin 99 exit device?

Resolution: The cylinder cam must be inverted with the SD option to work properly.:

Can the 8200 Series operator power a electric strike?

Resolution: The 8200 Series operator CANNOT power a strike, maglock, or EL device. A separate power supply is ALWAYS required. There is an onboard relay to control a strike, maglock, or EL device.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ EL Device with FSE ”

RELATED FAQS