Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ do floor magnets require door stops? ”

RELATED FAQS

Resolution: Overhead Stop, Floor Stop, Wall Stop, Stop:

Resolution: Hold Open Closers & Magnets (Fire/Life safety products) provide a wide range of solutions. Single or multi-point hold open closers Utilize an electromechanical closer. Hold the door o...:

Can a magnet, or sentronic device, be released and close the door from a button at a desk?

Resolution: If a door is being held open by the LCN SEM 7800/1900 magnet or any ME/SE Series Sentronic LCN closer, you can remotely release that door to close by ordering the following parts and wiri...:

What are door levels and models?

Resolution: Levels and Models (covered in ANSI A250.8 (SDI 100) "Recommended Specifications for Standard Steel Doors and Frames") are SDI term aid in the selection and specification pr...:

How do I attach extensions to my magnet?

Resolution: The magnet extensions can be used with both the SEM 7800 and the SEM1900 magnets. To add extensions to the SEM series magnets, you "MUST" start with the 7810-514 coupler kit. The coupler kit pro...:

Does Von Duprin have a fire latch that will go into the floor?

Resolution: Auxiliary fire latch is tested only from door to door latching by Von Duprin. Some door manufacturers have tested our devices LBR and use additional fire latches to pass the fire test. Contact the ...: