cylinder for cylinder odgging

RELATED FAQS

Question
Answer
CD
 A 1 1/4" cylinder with straight cam is required for the Von Duprin SD (Special Dogging) exit device option.
The cylinder cam must be inverted with the SD option to work properly.
The 17, 18, & 19 devices use the same dogging assembly part #610480.
This option is not available as the solenoid is in the mechanism case where the dogging components would go.  An HD-EL solenoid is not available, and Special Dogging(SD) is not an option ...
When ordering dogging with cylinder; specify complete cylinder with appropriate option below: XQ11-949 for all conventional cylinders  XQ11-948 for full size and small ...
XQ11-947 was used Classic conventional cylinders prior to the release of modular - NOW OBSOLETE
The cam is not inverted on the mortise cylinder for the CD option.
Cylinder dogging (CD) and an RX switch can be ordered together with 33/35 or 98/99 series.
This can be done ONLY with non fire rated exit devices.
Effective July, 2014, there is no longer a specific modular cam part number for dogging. The Schlage modular straight cams come with two mounting holes that allow for the cams to be mounted inverte...
Cylinder dogging CD is not available with 22 series exit device.
Standard 98/99 exit alarm ALK devices are available with cylinder dogging option as of October, 2011. The device can be ordered standard with cylinder dogging and exit alarm ALK opti...