Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Cutting Exit Devices ”

Resolution: For most exit devices, please refer to the specific device series catalog for minimum door opening width the device can be cut down to fit. Be aware that some device options, frame...:

Can the XX-V, 19-V, 24-V or 25-V extension rod be used on the bottom rod?

Resolution: The extension rod could be used either on the top or bottom rods.:

What is the minimum opening that a Chexit 4' device can be cut down?

Resolution: The Von Duprin CX 98/99-4 feet Rim devices on single doors with 5/8" stops and the standard 299 roller strike can be field sized to fit a minimum of 40.2" door opening. This an...:

Can the existing 9927/9947/9948 devices be cut to fit a 24" leaf?

Resolution: No, the existing 98/9927/F, 98/9947/F and 98/9947/F devices can't be cut to fit a 24" leaf door.:

What trim will work with the discontinued Monarch18 series exit devices?

Resolution: Falcon Monarch XX series trims will work with Monarch 18 series exit devices.:

Can you cut the EL conversion kit - 3' base plate to fit a 30" 9947 device?

Resolution: You need to order the EL98/9947 or 3' EL conversion kit. This will fit on 28 1/8" minimum door opening on two vertical x vertical rod device doors.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ Cutting Exit Devices ”

RELATED FAQS