Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ cutt down exit device ”

Resolution: For most exit devices, please refer to the specific device series catalog for minimum door opening width the device can be cut down to fit. Be aware that some device options, frame...:

Can you cut the EL conversion kit - 3' base plate to fit a 30" 9947 device?

Resolution: You need to order the EL98/9947 or 3' EL conversion kit. This will fit on 28 1/8" minimum door opening on two vertical x vertical rod device doors.:

What is the minimum opening that a Chexit 4' device can be cut down?

Resolution: The Von Duprin CX 98/99-4 feet Rim devices on single doors with 5/8" stops and the standard 299 roller strike can be field sized to fit a minimum of 40.2" door opening. This an...:

How far can the 1690 series Doromatic be cut down?

Resolution: A standard 1690 device can be shortened by 6" per page 12 of the 1690 instructions:

How far can a 4ft EL 99R device be cut down to?

Resolution: EL98/99-4 ft rim device required minimum of 35.2" with 5/8" stop height door opening on single door and 35.56" with 4954/9954 mullion.:

Can the 2670 be cut down to fit smaller door widths?

Resolution: The 2670 Guard X device can't be cut down to fit doors less than 3 feet. This device is designed to fit doors 36"- 48" in door width.:

Can the XX-V, 19-V, 24-V or 25-V extension rod be used on the bottom rod?

Resolution: The extension rod could be used either on the top or bottom rods.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ cutt down exit device ”

RELATED FAQS