Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
CTE Stuck Tamper Switch
”
RELATED FAQS
Question
Answer
Has the Main Printed Circuit Board used with all AD-Series products been updated?
Resolution:
The Main Printed Circuit Board used with all AD-Series products has been updated with three major changes: - A more robust Tamper Switch and MUCH improved Tamper Switch lever arm and the location ...:
Schlage CTE - Tamper Alert
Resolution:
The tamper sensor on the CTE detects when the cover is taken off of the unit. This will trigger a tamper report in the audit history. The CTE has an optical tamper switch. It is l...:
Why would an LCN 8310-865 RF Receiver have a flashing "RED" light?
Resolution:
When the "RED" LED on the 8310-865 RF Receiver is blinking, it is receiving an RF signal (interference) from a non programmed device. When receiving this type of signal, it will not ...:
What is an error code E04 on an LCN 4600?
Resolution:
An error - E 04 - is an indication of a constant activation input from either the "Hold Open" switch or a "Wall Activation" switch when the 4600 power is turned on. This condition also occurs when ...: