Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
Coordinator on aluminum frame
”
RELATED FAQS
Question
Answer
How is a bar coordinator installed on an aluminum frame with a 5/8" blade stop?
Resolution:
This can vary based upon situation. It may be able to either "cut away" the blade stop, or mount the COR with "spacer blocks" below the stop. Allegion does not sell spacer b...:
What electric strike will work with mortise lock and aluminum 1 1/2" faced frame?
Resolution:
Von Duprin doesn't offer any electric strike to fit into 1 1/2" aluminum/metal faced frame. Minimum requirement to install 6211/6211AL is 1 15/32" mortise depth.:
BLADE STOP SPACER
Resolution:
Shoe Spacer, Parallel Arm Closers, Aluminum Frame, Aluminum Store Front Frame:
BLADE STOP
Resolution:
Aluminum Frame, Aluminum Store Front Frame, Aluminum Door and Frame:
What electric strike can be used with the 1790?
Resolution:
None of the Von Duprin electric strikes will work in a retrofit application where the normal standard mechanical strike is mounted to the frame because none of them are thin enough to fit in...:
What is a 62A shoe used for?
Resolution:
The 62A shoe is used when it is necessary to install the door closer (lower) down on the door so that it will operate under accessories such as overhead stops, coordinators, etc.: