controll key factory system

RELATED FAQS

Question
Answer
All lock cylinders on a specific project are operable by a special "project key".  Duplicates of this key may be assigned by the building contractor to workmen and subcontractors as required. ...
Schlage Everest 29 is a new keyway family that launched in August 2012 and is patented until 2029. It offers the highest level of restricted key system security by Schlage through patent protection...
The 6 digits stamped on the key can be referenced by the Key Control group to identify the system.  Please call 877-671-7011 option 1, option 1 and request the Key Control.
Key systems are a mechanical means of access control. Key systems have a defined amount of key combinations. A simple master key system allows a single Master Key to operate a group of cylinders ke...
Much like the key control of masterkeyed codes in a mechanical key system, key management in an electronic system is the process of controlling badge IDs, facility codes, and ensuring the security ...
For all Schlage and Falcon small format interchangeable cores shipped from the factory 0-bitted, the control key will be cut to all 4's.
Yes, as an option, Steelcraft doors are available with factory prepared for the 98/9949 Concealed Vertical Cable Exit Device. L, B, CE, T and CE-Series doors are available factory prepared Door...
A zero bitted Falcon SFIC core is combinated for the control key to be cut at all 4's.
A control key is required to install or remove an interchangeable core from a housing or lever. The control key is identified by having "CONTROL" stamped on the bow. How to install and remove an i...
The lever may be missing the slot feature for the core locking lug.  Verify slot is in place.
Choose the appropriate full size control key from the selection below.
Classic Conventional Key Blanks and Cut Keys Part Number Description Key Blanks 35-056 Control Standard bow, embossed both sides 35-076 Standard bow, unembossed both s...
The Schlage full size construction control key part number is 48-056-ICX.  The ICX suffix will change depending on if the key is for a new job or existing job.   New jobs: Specify "ICX"  E...
Conventional Cylinders - A conventional cylinder is one that requires some breakdown of the lock in order to be removed. These are the most commonly used cylinders sometimes called key-in-lever...