Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ construction cores fsic ”

Resolution: This only applies to the full size interchangeable cores. The SFIC mortise cylinders have part numbers for housings with construction cores (Disposable and Keyed). Simply add (-ICX) to the end o...:

What Schlage construction core will work in a C987?

Resolution: Any SFIC core will operate in the C987. Specifically, the Schlage temporary cores are the 80-035 GRN and 80-035 BRN.:

What is the part number for a full size construction control key?

Resolution: The Schlage full size construction control key part number is 48-056-ICX. The ICX suffix will change depending on if the key is for a new job or existing job. New jobs: Specify "ICX" E...:

Does Schlage offer a Rim cylinder FSIC housing less core?

Resolution: Rim cylinder housing only for SFIC is part number 80-129.:

How can you tell the difference between the FSIC and SFIC cores?

Resolution: There are several ways to spot differences, see Figure 1, but the easiest is to look at the face of each core. The face of both cores looks like a "figure 8". With small format, bo...:

Why is the plug pulling out of the FSIC 23-030 mortise housing?

Resolution: ISSUE: After some use the plug will begin to project from the cylinder face and will ultimately pull completely out. ROOT CAUSE: In a dogged application the cam was rotated 180 degrees which ...:

How do you order the ND series lock with a small format core?

Resolution: The letters GD, HD, BD, or BDC should be put after the lock function. EXAMPLE: ND53BD GD = Schlage SFIC core HD = Construction core BD = Less core BDC = Plastic temporary construction core:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ construction cores fsic ”

RELATED FAQS