Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ CHEXIT EXTERNAL INHIBIT TIME ”

Resolution: For Chexit devices shipped after 8-24-2015 with motor driven connect your normally closed contact from access control system between green and red on the twelve field wire ...:

How do I connect External Inhibit wires on Chexit?

Resolution: Chexit devices shipped prior to 8-24-2015 were solenoid driven: A normally closed card reader contact, key pad contact or any other control contact connects to the G...:

Does the current Von Duprin ALK have an EI?

Resolution: Current exit alarm ALK released in November 2010 does ship standard with an EI (external inhibit) option. ALK shipped prior to this would only have EI if ordered as a Special option.:

Is the external inhibit option standard on the " new " ALK from Von Duprin?

Resolution: The current Von Duprin ALK comes standard with the External Inhibit feature.:

Why does a Chexit device blink once then powers down?

Resolution: If Chexit device LED blink once when you turn the unit on, the External inhibit green wire is not by passed or not connected to the access control normally closed contact. For devices sh...:

Will CX re-arm if door is held open?

Resolution: If a door position switch (DPS) is connected across the green and white wires of the old CX (green and red of new CX) the CX would go into alarm if the door is held open when it attempts to rearm.&...:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ CHEXIT EXTERNAL INHIBIT TIME ”

RELATED FAQS