Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
“
chexit circuit board
”
RELATED FAQS
Question
Answer
What is the Von Duprin Chexit module part number?
Resolution:
Part number for Von Duprin standard 15 sec. release Chexit module shipped after 8-24-2015 with motor driven is 040086-00. Part number for Von Duprin standard 15 sec. release Chexit module shi...:
Is the Von Duprin Chexit part number 050228 a module or a kit?
Resolution:
The circuit board is sometimes referred to as a "module" in the field.:
Has the Main Printed Circuit Board used with all AD-Series products been updated?
Resolution:
The Main Printed Circuit Board used with all AD-Series products has been updated with three major changes: - A more robust Tamper Switch and MUCH improved Tamper Switch lever arm and the location ...:
Can I bypass the circuit board on a M420 M450 or M490: Unsupported voids warranty
Resolution:
No the M400 series of mag locks may not operate direct wiring the power to the coils . Bypassing the circuit board or direct wiring the coils is not supported and voids the warranty ...:
What firmware does my CO-100 lock have?
Resolution:
CO-100 now has NEW lock status reporting capabilities. Battery status, firmware version, hardware version and PCB serial number. See instructions below for these status menus. :
How to replace the circuit board or horn on a Guard-X device?
Resolution:
See PCB replacement instructions. The horn is part of the board and can only be replaced by replacing the entire board.: