Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ can we get Falcon W series with schlage FSIC ”

Resolution: AutoCAD drawings are proprietary and are not available for distribution. :

Can the Von Duprin 5100 electric strike be used on a pair of doors?

Resolution: The following application information apply to the 5100 electric strike: Can only be used on a single door with a cylindrical lock Can not be used on a pair of doors Can not be used on a mullion:

Can a door have an InPact device and glass lights?

Resolution: Glass lights available: Standard Glass Lights - The N4, N5 & V lite can be used at standard locations with out any modification. Glass Light Options - Other glass lights are available but ...:

Does Falcon provide an On/Off switch for the 8200 series operator?

Resolution: The Falcon 8200 operator is not available with a factory supplied on/off switch. If required, it must be supplied by others.:

Can I get the T series with a Schlage Full Size Interchangeable core?

Resolution: The T lock can accept a Schlage Full Size core, but the cylinder suffix must be specified as "J IC-SC" so the correct parts are supplied (including the tailpiece) Example: T581J IC-SC:

Can I get the RU series with a Schlage Full Size Interchangeable core?

Resolution: The RU lock can accept a Schlage Full Size core, but the cylinder suffix must be specified as "J IC-SC" so the correct parts are supplied. The tailpiece will come with the lock. Example: RU581J IC-SC:

How do I cut a door to accept a Falcon W series lock?

Resolution: For W lock levers, you can choose whether or not to install the mounting posts. This will also affect how the door is prepped so be sure to determine how you will install the locks befor...:

Is the Falcon Y lock discontinued?

Resolution: Falcon strives to provide a solid product, with solid performance, at a solid price. To better align with this mission statement the Grade 2 tubular Falcon Y lock and all parts will be...:

What is an interconnected lock?

Resolution: Interconnected Locks: a lockset whose trim provides a means of simultaneous retraction of two or more bolts which may also be operated independently Medium duty Commercial, government or multi-...:

When was the Falcon W Series launched?

Resolution: The Falcon W-Series was launched in April of 2006.:

Can I put a Schlage Key-In-Lever cylinder into a Falcon D100 or D200 lock?

Resolution: For a Schlage "C" keyway: Specify "CP6" as the cylinder suffix when ordering D100 or D200 locks (All other Schlage keyways are not available).:

Where can I find hurricane ratings for Schlage and Falcon?

Resolution: There are several Schlage and/or Falcon locks that have been tested and approved for this application. For Commercial use the locks have been tested and approved as ...:

Is there a tool to drill the thru bolt holes on cylindrical locks?

Resolution: Order the M204-198 thru-bolt jig, see Figure 1. Figure 1: M204-198 thru bolt jig The 40-080 was the old Schlage jig. The 030736-000-70 was the old Falcon jig. When the jig changed to...:

What is the part number for the Schlage cylinder to work in a Falcon T lock?

Resolution: Schlage offers Falcon Retrofit cylinders to fit many of Falcon's locks. Table 1 below contains part number for T series locks. Table 1 - Falcon retrofit cylinders :

What is a mechanical Lock?

Resolution: A lock is any device which prevents access or use by requiring special knowledge or equipment. Mechanical locks are mechanical devices which secure an opening by keeping a door closed until a rel...:

Does Schlage or Falcon manufacture a stainless steel cylindrical or mortise lock?

Resolution: Schlage does not have a stainless steel/non-ferrous lock series. The only option that Allegion provides is the Grade 1 cylindrical Falcon X-Series. To order the Falcon X with the stainless st...:

Is dogging available w/ EL option on 24 or 25 series devices?

Resolution: This option is not available as the solenoid is in the mechanism case where the dogging components would go. An HD-EL solenoid is not available, and Special Dogging(SD) is not an optio...:

Does Schlage or Falcon offer a backset greater than 5"?

Resolution: Only the Schlage D-knob and ND products are available with an extra long backset. The part number for backsets over 5"-42" is XC03-069, this part will ship as an extension link to b...:

What replaced the Falcon F lock?

Resolution: The Falcon W-series lock has replaced the Falcon F-series and the Falcon Y-series. :

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ can we get Falcon W series with schlage FSIC ”

RELATED FAQS