Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ can fire rated door be undercut? ”

Resolution: The bottom rod of the device will accommodate a 1/4" to 3/4" door undercut per 2130 template .:

What Steelcraft doors can be prepped for a Von Duprin InPact device?

Resolution: Steelcraft L-Series and T-Series doors are available (as an option) factory prepared for the Von Duprin InPact exit device. :

Can decorative metal panels be installed over the entire surface of fire doors?

Resolution: Decorative metal panels can only be attached if the panel manufacturer is UL listed in UL’s category GVUZ. All installation, sizes and hourly ratings are in accordance with that manufacturers” ...:

Can protective plates be attached to fire rated door?

Resolution: Yes, Steelcraft doors we are approved up to 48" in height or not to exceed a total 2304 square inches per face. Protective plates are usually flat sheets of metal or plastic applied to one or both...:

Can 5100 electric strikebe used on fire rated door?

Resolution: The Von Duprin 5100 electric strike is not for fire rated applications.:

Is the Von Duprin 6223 fire rated for pairs of wood doors?

Resolution: The 6223-FSE electric strike is fire rated for pairs of wood doors, but check with wood door manufacturer to see if they have been approved for this application.:

Can an electric strike be used with a surface vertical rod device on a fire-rated door?

Resolution: Not for use in fire rated openings.:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ can fire rated door be undercut? ”

RELATED FAQS