blinking light handkey

RELATED FAQS

Question
Answer
Yes, the ID3D does have a red/green LED light option.  It's used to indicate successful (green) or rejected (red) hand reads.  The part number is GL-100 and it can only be installed in th...
If Chexit device LED blink once when you turn the unit on, the External inhibit green wire is not by passed or not connected to the access control normally closed contact.  For devices sh...
When you see an Error 64 on a HandKey or a HandPunch, it may mean that the lithium battery is low or there is a disconnect with main board.  The first step is to replace the lit...
The following technical note describes in detail the installation process for upgrading a biometric F-Series HandKey or a biometric F-Series HandPunch with a modem communications mod...