None of the Von Duprin electric strikes will work in a retrofit application where the normal standard mechanical strike is mounted to the frame because none of them are thin enough to fit in...
The Von Duprin 1439 strike is designed to be used on a blade stop frame and is 1/2" in height. The 299 strike is normally used on the stop of a frame and is 13/16" in height.
Hospital Stops are located at the bottom of the frame jambs and/or mullions. The integral door stops are terminates above floor line and is closed with a 45° or 90° angle to facilitate cleaning at ...
Yes, hospital stops are available on fire rated frames.
Maximum approval = 3 hour
Maximum sizes:
singles up to 4'0" x 8'0"
pairs up to 8'0" x 8'0"
Maximum hospital stop height 6" from bot...
The lever removal tool can be used to remove levers in both the ND and the L Series mortise locks.
On August 15, 2012 Schlage began shipping a new, more ergonomic, lever removal tool to coincide with Phase 1 of the ND-Series improvement project. This tool can be used for Schlage ND-Series ...
DW and K-Series frames are designed to slip onto a stud wall after the wall is finished (painted, wall papered, etc).
Walls can be either wood stud or steel stud
Used only for interior applicat...
Factory finished painted doors are available from Steelcraft. Frames "are not available" factory finished from the factory.
Doors are offered in variety of standard colors or can be fini...
When trying to do a general exclusion on Ring if the Tools option does not appear this is due to being set as a shared user rather than an owner on the system. Contacting Ring support can help reso...
Though not designed for use in exterior applications, the 6111 electric strike will function with the 98/9952 series exit device. Depending on the construction of the gate post, a blade sto...