It is not possible to mount a cylindrical lock less trim one side, however you can order the lock less components (like lever or rose).
If the customer is looking to mount the lever less trim, t...
We have several blank trims listed in the price book to cover existing trim prep in door.
DEVICE
EO TRIM
22
230EO
88
880EO
98/99
990EO or 996EO*
33A/35A Rim, 33/3...
Classroom Exit Lock - The Outside is a Blank plate - has Key that locks or unlocks Inside lever. _ Caution: These locks on residences and any door in any structure which is used for egress are a li...
The ND12 and ND25 are both exit locks.ND12 Outside lever always fixed. Insidelever always unlocked for immediateegress.ND25Blank plate outside. Inside leveralways unlocked for immediate egress.
Storeroom Exit Lock - The Outside is a Blank plate - has Kdy that retracts latch. Lever is fixed. - Caution: These locks on residences and any door in any structure which is used for egress are a l...
Monorail cutouts are typically the upper corner of door. Channels are cut to size welded into door held flush to cutout. We do not supply any covers or plates to finish.
The size monorail cutout is 8" wide x 24" high
Monorail cutouts are only available for non fire rated applications.
Both adaptors are used on the B250 Series for doors prepped with a 2-1/8" bored hole instead of the 1-1/2" bored hole.
38-031 is a light gauge ring for use under a cylinder, diameter is 2 1/2"
...
The Von Duprin CD kit comes with the cover plate machined to accept the cylinder dogging mortise cylinder.1 1/4" mortise cylinder with an inverted straight cam is required for CD option on Von Dupr...
The 15” cable is intended to allow the CT5000 to be installed near the door opening and bring the HHD USB programming port down to a reasonably accessible location for access programming and s...