Required top and bottom rod adjustment. Top rod possibly is adjusted too short and not lifting the rod far enough to engage the latch retention which would cause bottom rod to drag floor ...
Following parts are required to add the bottom rod and latch to the 98/9927-LBR/LBR-F device.
Bottom Rod: 050515 for 9827 and 050514 for 9927 (specify finish)
Bottom Latc...
This is available.
If this is a fire rated opening you must use the Auxiliary Fire Latch Kit to maintain your Fire Rating. If not fire rated simply omit the bottom rod but be aware that your...
The 6111 electric strike can be used only on non rated openings less bottom rod with pullman top latch (use ES prefix when ordering device). Device back set will change to match the centerline of t...
The following items may cause the exit devices top latch from being held in the retracted position.
1. The top or bottom rods are out of adjustment.
2. The top latch hold back...
Following exit devices 2227/F, 33/3527A/F, 33/3547A/48A/F, 98/9927/F and 98/9947/48/F have similar rod adjustment procedures.
All top latches control the bottom latch assemblies. When do...
One of the following items may cause the EL1690 device to retract then release:
Incorrect power supply - Verify you have the PS873-2/4TD or PS914-2RS/4RL power supply.
Problems with wire gauge...