Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ actuator mounting height ”

Resolution: Always check the most current revision of the ANSI A156.19 standard for recommendation or requirement of the location of a Knowing Act switch. 2019 ANSI A156.19 states the requirement of the ...:

What is the Buy American Act (BAA)?

Resolution: BAA/ARRA stand for Buy American Act and American Recovery and Reinvestment Act. A brief description of some of the federal requirements can be found in the BAA Catalog on the Allegio...:

Can a 8310-818 be used outside?

Resolution: Exterior mounting of the 8310-818 series actuators is not recommended. The 8310-818 series actuators are designed to be jamb mounted on the frame. With that installation, the person will have to ...:

Will the 8310-853 actuator mount in a single gang or a double gang box?

Resolution: The 8310-853 (T) series actuator will mount to either a single or double gang electrical box.:

What actuators can be used on the 8310-866 Bollard post?

Resolution: The LCN Bollard post (8310-866) only accepts the "square" actuators (no round actuators). The size of the Bollard post is 4” X 6” X 36”. Acceptable actuator part numbers are: Hard Wired - 831...:

What height should a lock or deadbolt be installed?

Resolution: According to ANSI specifications for cylindrical or mortise locks: The lock strike centerline should be 40 5/16" from the bottom of the frame with the lock in relation to the strike.&...:

Schlage 320M Maglock Recommended Height

Resolution: No, Each door frame is different. Closer to the center would give the best holding force, however..:

Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

“ actuator mounting height ”

RELATED FAQS