Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

Von Duprin

Can you power an electric strike or maglock from the 9500 Series Senior Swing?

Resolution: An electric strike or maglock (24 volt only) can be wired to a Senior Swing 2800/9500 series operator using the P10 Lock Interface cable.For Current Sr Swing control boxes with ID# 72940 on th...:

Can 24 volts be run to a 12 volt 6000 series electric strike solenoid?

Resolution: You can't run 24VDC into the 12VDC electric strike, over voltage such as this will cause the solenoid to heat up and damage the solenoid. You must change to a 24V solenoid, part number 050240-00.:

What is the part number for SO24 rectifier?

Resolution: The part number for the SO24 rectifier is 010058-00.:

How is the QEL calibrated?

Resolution: The QELA motor that has shipped since 2015 is self calibrating. Older versions had a calibration button, and these notes would apply: Calibration is an internal process of the QEL device&...:

How do I identify the voltage on the rotary solenoid for E360/E370 Series lever controls?

Resolution: The wires are white for both 12 and 24 VDC solenoids for Von Duprin lever controls. The last 3 digits on the solenoid sticker identify the voltage: -032= 12VDC -034= 24VDC :