Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
Schlage Electronics
Question
Answer
Why doesn't full rotation of the AD or CO Series Exit Trim (993) outside lever fully retract the Von Duprin 98/99 Exit Device latch?
Resolution:
- AD Series and CO series products require that the Night Latch (NL) screw is installed in the exit device. Be sure this screw is installed- Exit hardware and strike must be properly mounted ...:
Which tailpiece do I use for the AD993-R or the AD993-M?
Resolution:
In the AD and CO Series replacement parts guide it shows the same part number 46929295 for the 993R, 993S, and 993M. The pictures show that the 993R and 993S have a flat straight tailpiece and the ...:
How can I find out which firmware each AD-Series model should have?
Resolution:
All Allegion associates can go to this SharePoint site for firmware, software releases and technical bulletins. Follow the link provided HERE and make it one of your "FAVORITES" for...:
The default PIN code (13579#) does not work on my AD or CO250 lock?
Resolution:
In the factory default reset state, an AD250/ CO250 lock with a keypad will have a default PIN of 13579 and “#”.Legacy Campus Locks (CL) that were replaced by AD250 and CO250...:
AD-993 - Cylinder loose in lever - Spacer missing
Resolution:
In the early cylindrical version of the AD-Series 993 locks, a spacer may be required for proper cylinder functionality. Effected cylinder types are PD / LD / RD / JDIf a customer is ...: