Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

LCN

How do you program the 8310-865 RF receiver?

Resolution: To program the 8310-865 receiver: Set the dip switches 1 to the "OFF" (pulse) position. Set the dip switches 2 to the "OFF" (0.5s) position. Momentarily press the " No Delay" or "Delay" ...:

What wire gauge is recommended for LCN hardwired actuators?

Resolution: LCN recommends an 18 AWG (minimum) wire size (gauge) to the 8310 Series hardwired actuators.:

Why would an LCN 8310-865 RF Receiver have a flashing "RED" light?

Resolution: When the "RED" LED on the 8310-865 RF Receiver is blinking, it is receiving an RF signal (interference) from a non programmed device. When receiving this type of signal, it will not ...:

What is the 8310-865 frequency?

Resolution: The 8310-865 receiver is a frequency of 433MHz. Receiver is a Blue Plastic Receiver with 10RD433 on it. :

8310-865 receiver and sequence.

Resolution: RF sequential operation requires the use of of a minimum of 2 receivers (8310-865). Depending on the desired operation required (if using access control), it may require up to 4 receivers (8310-865...: