Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: The 321 finish is a code that is internal to Allegion and represents a particular method of creating a 613 Oil Rubbed Bronze finish. 321 has a copper flashing applied over a brass...:

When was the Falcon RU series discontinued?

Resolution: The Falcon RU series was discontinued September 2022.:

What does power cycling mean on electrified locksets?

Resolution: Power cycling is the process of turning the power off to the lock hardware and then turning it back on again. :

Does the IC lever for the Falcon T series have a hole for the lever catch?

Resolution: There is no lever catch hole on any T series prepped for IC cores whether it is SFIC or IC competitor prep. To remove the lever on a T series Falcon lock with IC lever prep, you will hav...:

Is there a 3/4" throw latch for the Schlage ND series?

Resolution: The Schlage ND series does offer a 3/4" throw latch. The part number for the latch would be the 14-042. :

Can you order a L9066 lock body only?

Resolution: The L9066 is a special storeroom lock function and the lock body cannot be ordered as a separate part. You can order the lock less components to get the lock body only. Example...:

Is the 871-2 option board compatible with PS900 Series power supplies?

Resolution: The 871-2 option board is incompatible with PS900 Series power supplies. The remaining PS800 Series option boards such as the 873-AO, 873-4TD, etc. are also incompatible with the PS900 Series.:

Can I order the Von Duprin 6400 electric strike with latch monitoring pre-installed?

Resolution: Latch monitoring is only available as a retrofit option for the Von Duprin 6400 electric strike. It cannot be pre-installed at the factory.:

Are the old 992 mounting studs (Part 969546) still available?

Resolution: The old style 992 mounting studs (Part 969546) have been discontinued and are no longer available.:

What are the different tactile options available for the L9000 series mortise locks?

Resolution: The two different Tactile options are a Milled Pattern, and a Knurled Pattern. Please click here for an image of the Milled and Knurled Pattern, and a list of levers that are available with e...: