Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: Special Rust Inhibitor (SRI) - is a pretreatment that is applied to the metal components prior to the addition of the LCN powder coat finish, standard or custom.&nbs...:

Can the 4630/4640 cylinder only be replaced?

Resolution: The 4040(XP) door closer can be used as a temporary replacement in a 4630/4640 operator to provide manual control of the door while the 4630/4640 closer cylinder is being repaired or a replacement ...:

What would replace a 4013 closer?

Resolution: The 4010 Series "fixed" sized springs are no longer available. The 4010 Series closer are now available as a 4011 and a 4016. The 4011 is an adjustable spring closer for sizes 1-5. The 4016 is stil...:

Which Falcon closer has the mounting hole pattern of 12" x 3/4"?

Resolution: The Falcon SC81 series closer has a mounting hole pattern of 12" x 3/4".:

Can you power an EL device from a senior swing?

Resolution: Their is not enough power on a Senior Swing to power an EL device, need PS914-2RS/4RL power supply.:

Is there a template for the 1408 strike?

Resolution: There is no template for the 1408 strike.:

Is there an identification chart for all the different rollers that LCN has?

Resolution: On Feb 8th, 2016 - LCN launched the redesign of the Hold open clip which changed multiple components of our Track style closers, including the roller, track, hold open clip, and bumper. :

Can a Glynn Johnson 900 be used with a 4040EDA?

Resolution: ST-2731 is a special arm used to template the 4040EDA and a GJ 90 series (1-4). There is a "list" add-on price for this special template. With a GJ90 and a coordinator, you could combine ST-2731, ...:

What is the power output of a 4600 operator?

Resolution: The 4600 Series operator has both a 12VDC and 24VDC output rated at 1A (combined load) to power strikes, maglocks, and other devices, but an EL device must have a separate Power Supply for motorize...:

Are LCN metal covers a ferrous or non ferrous Material?

Resolution: All LCN metal covers are steel which is a Ferrous material. FerrousThese are metals which contain iron. They may have small amounts of other metals or other elements added, to give the ...: