Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: The levers on the LT lock are field reversible.:

What is the 40-116 cylinder loading tool?

Resolution: The 40-116 cylinder loading tool was discontinued in 2015.:

LM9380 won't lock with a key and cylinder.

Resolution: The LM9380 lock is shipped in the locked state BEFORE the cylinder is installed. If required move the turn hub to the locked state then install the cylinder.:

What finish does Schlage recommend for outdoor use?

Resolution: From a BHMA Environmental testing aspect, the following finishes for exterior use are recommended.Best - 629/630 - Bright or Satin Stainless; no top-coat Better - 626/682/625 – Sat...:

Resolution: Lock Prep, Mortise lock Prep for Escutchion Trim; ANSIA115.1, Door Lock Prep:

160

Resolution: Lock Prep, Cylindrical Lock Prep for Knob trim; ANSIA115.2, Door Lock Prep:

161

Resolution: Lock Prep, Cylindrical Lock Prep for Knob trim; ANSIA115.2, Door Lock Prep:

160-4

Resolution: Lock Prep, Cylindrical Lock Prep for Knob trim; ANSIA115.2, Door Lock PrepA 160-4 lock is a cylindrical lock preparation. The lock has a 2 1/8” diameter bore through the door with a 2 3/4" backset...:

160ED

Resolution: Lock Prep, Cylindrical Lock Prep, Edge Prep Only; ANSIA115.2, Door Lock Prep:

161ED

Resolution: Lock Prep, Cylindrical Lock Prep, Edge Prep Only; ANSIA115.2, Door Lock Prep: