Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: UL 1034 is a standard for Safety Burglary-Resistant Electric Locking Mechanism. These types of locking mechanisms rely on an input signal or voltage from another device to lock or unlock the...:

Does the AD/CO locks have a shutdown feature after a denied access has been attempted multiple times on the keypad?

Resolution: · The AD and Co series locks have a shutdown feature, after 20 wrong button presses the lock will shut down for 30 seconds:

When I connect my HHD to the PIB-300 2D to change the output settings when using a RLDB option board my settings are grayed out

Resolution: Output Reporting: Door · Off=normally open door status output (when door closed) · On=normally cl...:

What are some reasons the NDE lock drains batteries?

Resolution: · Make sure door is not being propped open, this would cause the lock to continue to send and received updates through WI FI · &nbs...:

Will the 900-FA board drop power to the entire power supply?

Resolution: Only if connected to a PS-902. If using a separate option board to connect the 900-FA to a PS-904, 906, or 914 then it will only drop the power to the option board it is mounted onto.:

Is the mortise lock case the same size for L/LV9000 and CO Series mortise locks?

Resolution: Yes, the dimensions are the same for door prep at 4 7/16" x 6 1/16" x 1". Use door template L1.:

Does the Falcon 24 / 25 series have a BE (blank escutcheon) plate available for (EO) exit only applications ?

Resolution: As of this writing (August, 2016), a specific BE (blank escutcheon) plate for exit-only applications is not available for Falcon 24 / 25 devices.If a plate is needed to cover holes on the pul...:

Is LM9200 available less top latch?

Resolution: The LM9200 is not available to be ordered less top latch, nor can the LM9200 series be used less top latch. :

Is the LCN Alum Series closers available in a plated finish?

Resolution: No. The Alum LCN series of closers, which include the following; 1250, 1450, 1450T, 4050(A), or 4050(A)T are not available in a Plated Finish.:

Can the Schlage L Series 180 degree indicator be manipulated?

Resolution: See complete memo here.Excerpt from memo: With the new 180 degree indicator, recognizing the diversity of application where having the indicator unlock the door would be an issue, the p...: