Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

why does KC get 10-12 red blinks when valid pin code entered Why does the lock get red flashes what do red flashes on a lock mean

Resolution: low battery - check voltage at ibutton port -shoud be approximately 6 volts with fresh batteries:

Why won't Schlage Express transfer door data to the HHD?

Resolution: The Schlage Express software by default does not know where the synchronization directory is for the logged in User Name and Hand Held Device (HHD). This directory has to be pointed to during...:

What is the nuisance delay for the M490DE?

Resolution: The nuisance delay can be set from 0 to 3 seconds:

Does LCN have CAD drawings?

Resolution: LCN CAD detailed drawings are internal confidential documents, and unfortunately are not available.:

Explain the B580 deadbolt function.

Resolution: The B580 "Door Bolt" is a deadbolt that is thrown or retracted by the inside turn unit only. There is no outside trim or keyed cylinder.:

Can we use the HP IPAQ with Express 4.2.0 ?

Resolution: Yes:

How many actuators can you have programmed on an 8310-865 receiver?

Resolution: The 8310-865 RF receiver can have up to 100 transmitters programmed to it.:

Wiring diagrams for Open Options DNA Fusion access control system with AD-300 Hardwired, AD-400 Wireless Devices.

Resolution: Point to point wiring diagrams, consult with the ACP installation documentation:Open Options DNA Fusion Server with Controllers: SSP-EP, DController, and PIM400-1501OPEN OPTIONS DNA FUSION NC...:

What parts of the AD and CO locks have the antimicrobial finish?

Resolution: All finished surfaces of the AD and CO lock is has the microbial finish:

What size screws are in the AD cylindrical locks What are the screw sizes for the AD cylindrical locks

Resolution: See attachment: