Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Can the 9975 be used on 2 1/4" thick doors?

Resolution: This is an option but you must center the lock in the door per template W10305.:

What strike is used for a pair of doors with a Dor O Matic Rim device x Flushbolts on inactive door?

Resolution: The STK45 strike is used on the inactive door leaf.:

Resolution: Schlage Everest 29 is a new keyway family that launched in August 2012 and is patented until 2029. It offers the highest level of restricted key system security by Schlage through patent protection...:

What is the base material of keys?

Resolution: Schlage and Falcon commercial keys (conventional and IC) are a low nickel alloy that consists of around 1% lead content due to manufacturing requirments. :

What is the difference between the 4954 and the 1654 mullion?

Resolution: Von Duprin 4954 mullion is prepared for two 299 or 264 strikes and 1654 mullion is prepared for two 1606 strikes.:

Can the 3SP1 be used on a 8' fire rated door?

Resolution: The Ives Architectural Hardware Products Catalog states for the 3SP1 hinge;Maximum door weight 120 lbs, max door width 36"Maximum labeled door size - 3'0" wide x 7'0" x 1 3⁄4" thick as set in NFPA ...:

Does the Ives 482 Door Guard come with a rub plate?

Resolution: The Ives 482 does not come with a rub plate. The brass 482 Door guard (also called 482B) comes with an edge guard or plate that is applied with adhesive to protect the edge of the door.T...:

If I order replacement parts from LCN such as an Arm, cylinder, Track, PA Shoe, and Cover, do I need to order screws for installing?

Resolution: No, because individual or replacement parts from LCN come with the screws needed to mount them. One exception is LCN SEM magnet parts, see here. :

Can I wire a KP212 directly to an M490DE?

Resolution: Yes the M490DE or DEP require a dry contact closure across the RLS input to de-energizer the magnetic coil. :

How can I reduce interference of an AD lock to a PIM How can I reduce interference of a WRI to a PIM

Resolution: change the RF channel in the PIM, WRI/AD will beep to indicate channel selected: