Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Can an 18-R-L be converted to L-NL function in the field?

Resolution: Follow step 6 of the 18-R instructions to convert trim function to Night Latch(L-NL).:

Is there a parts diagram for a 996L trim?

Resolution: Reference the 994L trim which has the same internal parts in the parts manual.990 Parts Manual:

Resolution: L9485: Latchbolt retracted by key outside or by knob/lever inside. Outside knob/lever always fixed. Deadbolt thrown or retracted by inside thumbturn. When deadbolt is thrown, all keys become ino...:

Are the 6000 series strikes field selectable for 12 or 24 VDC?

Resolution: All 6000 series electric strike would require the solenoid be replaced to convert from one voltage to the other.:

Can you change the handing of the 2090 in the field?

Resolution: The 2090 is handed and is not reversible.:

What is a setup key?

Resolution: A setup key is an Everest key that has had the upper half of the blade removed. A setup key is an Everest key that has had the upper half of the key blade removed. See picture. A ...:

How thick of a door can a 99L x 996L be installed?

Resolution: 1 3/4" - 2 1/4" is standard > 2 1/4" up to 4" is an Engineering special.:

What is the difference between the 38-031 and 38-032 adapters?

Resolution: 38-031 is a light gauge ring for use under a cylinder, diameter is 2 1/2". The 38-031 when used under each cylinder on the B252 to allow the lock to be used on a 2-1/8" bore.38-032 was discontinued...:

Can electrified hinges be used on QEL devices?

Resolution: The electrified hinge can be used on QEL exit devices.:

What is the dimension of the A30775-000-00 thin door spacer for T series?

Resolution: The Falcon T series thin door spacer (030737-000) has an outside diameter (OD) of 3.545", and inside diameter (ID) of 1.95" and a thickness of .22". :