Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: A standard 2227/98/9927/F or 98/9947/48/F device can be cut down to fit a 26 inch minimum door opening. :

Resolution: Steelcraft's L-Series doors can be reduced in height by cutting off: A maximum of 4” from the top or the bottom of the door. If the door is fire rated, The distributor must be a listed UL/...:

What is the part number for the 6000 series electric strike 24VDC solenoid?

Resolution: The Von Duprin 6000 series electric strike can be converted by ordering the appropriate kits below. Kits include the solenoid, plunger, spring, and washer. 6000 Series solenoid Kit 1...:

Can the Ives VR810 trim be used with the 25 device?

Resolution: The VR 810NL-V or VR 814NL-V is used on both the 25-R & 25-V devices.:

Wholesale Key Account Siebel Account Numbers

Resolution: Key Wholesale Account Siebel Account # ADI 2063050061 Anixter 2126570000 MSC Industrial Direct 2000220000 WW Grainger 205763002 McMaster Carr 2005...:

How do I cut a door to accept a Falcon W series lock?

Resolution: For W lock levers, you can choose whether or not to install the mounting posts. This will also affect how the door is prepped so be sure to determine how you will install the locks befor...:

What is the part number for the 98/9927 bottom latch and cover?

Resolution: The part number for 98/9927 bottom latch less cover is 050401-00 and the latch case cover is 050566-xx.:

What is the part number for the 99L to 99L-2 kit?

Resolution: Format for ordering double cylinder (-2) and double cylinder with security indicator (-2si)(device) (fire rated)(-2 or -2si)(conversion kit)(finish)(handing) Examples:98/9927-F-2-Conversion Ki...:

What is the replacement for the 352+?

Resolution: M452P magnetic lock:

What would cause a 4600 (4630/4640) to keep blowing fuses as soon as the 120VAC cable is plugged into control box?

Resolution: The main AC fuse would blow if there is a direct short across the AC line. This could be caused by a:1. Defective I/O PC Board (-3180) To check - unplug the control box AC power cable (2 wire)...: