Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
FAQs
«
25
26
27
28
29
»
Question
Answer
How do I prevent the ND85 button from rotating?
Resolution:
In early 2013 the ND85 plunger assembly was improved to prevent accidental rotation of the inside button. The previous design could allow someone to unintentionally rotate the button and unknowing...:
Why won't the button stay locked on an ND40?
Resolution:
ND30 patio and ND40/44 privacy functions manufactured through December 2008 have potential for the outside lever to lock or unlocked intermittently. If you have these symptom then the re...:
ND40 and ND44 button installation
Resolution:
If the button and plunger or emergency cylinder are damaged they can be ordered separately. Part numbers are below. Emergency Button and Plunger (ND40) - N123-0...:
What power supply is needed for EL devices?
Resolution:
You can use a Von Duprin PS914 power supply with any of the following option boards depending on the application. 900-2RS board will power 1 or 2 devices that do not require timing from pow...:
LCN PA mount closer with Coordinator
Resolution:
ST reference document found here.Part number for the MS screws only is MS x ½” x Finish (individual screws) or MS/4 x ½” x Finish (pack of 4 screwsFor current ST pricing and templates please contac...:
What are the SRT screws lengths used with LCN Closers?
Resolution:
SRT "Self Reaming, & Tapping" screws are the default type screws shipped with LCN closers, when a specific screw type is not specified. There are 3 standard lengths of SRT screws:1-3/...:
What are the LCN standard finishes?
Resolution:
White Powder Coat can be ordered as a special RAL finish with a metal cover.:
What lengths of thru bolts are available from LCN?
Resolution:
The thru bolt for 1-3/4" door is 1-23/32" in overall length. The thru bolt for 1-5/8" door is 1-19/32" in overall length. The thru bolt for 1-3/8" door i...:
When was the BC100 series of deadbolts discontinued?
Resolution:
The BC100 series product line was discontinued on 9/14/2007 and replaced by the B500 series.:
Does Falcon have an indicator deadbolt?
Resolution:
Falcon offers an Indicator Deadbolt in the D271. The Indicator message reads "IN USE" and "VACANT". “IN USE” has a red background, “VACANT” is a green background. Figure 1: D271 with deadbolt ...:
«
25
26
27
28
29
»