Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
FAQs
«
22
23
24
25
26
»
Question
Answer
What is the L9066 XL11-897?
Resolution:
L9066 x XL11-897 Storeroom Lock Key in either cylinder locks or unlocks both levers. When locked, latchbolt retracted by key either side. Specify per XL11-897 with the lock function when or...:
How thick is the lead lining on a mortise lock?
Resolution:
The XL11-515 lead plate is 1/8" thick. :
Is there a latch spacer or reinforcement for the ND lock?
Resolution:
Prior to February 2016, using ND-Series locks on hollow metal doors required the use of latch spacers which prevent the latch from "fishtailing" (back end of latch moving from side to side). Latc...:
What is the California State Reference Code regarding lever return?
Resolution:
This is in regards to the California State Reference Code, (Formerly Title 19, California State Fire Marshal Standard) stating that all levers with returns comply; levers must return to within 1/2"...:
What is included in the 39-030 rabbeted latch and strike kit?
Resolution:
39-030 can be used on the A, AL, B250, B500, B600, D, ND, S products. This kit adapts a square corner latch and a 2 3/4" high square corner strike to 1/2" rabbeted door and frame preparation. :
Where can I find hurricane ratings for Schlage and Falcon?
Resolution:
There are several Schlage and/or Falcon locks that have been tested and approved for this application. For Commercial use the locks have been tested and approved as ...:
When was the Schlage K mortise lock introduced?
Resolution:
1) General Lock was purchased by Schlage - 1973 2) General Lock moved to Security and turned into the K-lock - 1977 3) K-Lock discontinued - approximately 1984 4) L-lock introduced - approxim...:
MA launch information
Resolution:
The MA was launched 4/1/10 and replaced the Falcon M lock. :
What are the keyway types and patents?
Resolution:
HIGH SECURITY Primus/Primus XP: In addition to six cuts for standard locking mechanism, there are five side finger pins to operate the secondary sidebar lock. Primus keys will operate non-Pri...:
What are the bittings for keys and cylinders ordered as a salesman sample?
Resolution:
Schlage Standard: C (5 or 6 pin), C123 (6 pin), S123(6 pin), CP (6 pin) Pins Change Key 5 35476 ...:
«
22
23
24
25
26
»