Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What cylinder length options are available?

Resolution: There are different mortise cylinder length options depending on the cylinder type. Below is a list of available options for conventional, FSIC, and SFIC cylinders, as well as the convent...:

What is the part number for the Schlage thumbturn rim cylinder?

Resolution: The rim cylinder with thumbturn, XB11-979 (Figure 1) was designed to be installed on the inside head of the Von Duprin 98/99–2 double cylinder exit devices, see Figure 1. The rim cylinder with...:

What are the construction core bittings for Schlage?

Resolution: Small Format Construction Cores (GREEN & BROWN) &nb...:

What is a wafer key?

Resolution: Information on wafer keys and keying can be found here.:

What is a wafer lock?

Resolution: Wafer locks are not nearly as well-known as their pin-and-tumbler cousins. However, an estimated one-fourth of the world’s locks are wafer locks (also known as wafer tumbler locks) so they are comm...:

What sections are used on split keys?

Resolution: Split key systems are delivered in the highest level section on the key tip (insert): L - obverse or classic Y - reverse 0000 - Paracentric ZZZZ - Quad D000 - restricted Everest C000 - open...:

Will an L9000 lock fit into a door prepped for the old SCHLAGE K series?

Resolution: K and L trim and parts are not interchangeable. :

Are the D100 and D200-Series thumbturns ADA compliant?

Resolution: The D100-Series and D200-Series have ADA compliant thumbturns. See the Falcon D series Brochure on page 2 stating ADA compliance.:

What is Blockokey keying?

Resolution: All lock cylinders on a specific project are operable by a special "project key". Duplicates of this key may be assigned by the building contractor to workmen and subcontractors as required...:

Can you mount W12's back to back?

Resolution: The Falcon W12 single dummy lock cannot be mounted back-to-back to create a double dummy. There is no access to surface mount the screws and the lever is held in place by a roll pin...: