Allegion
Terms of Use
Privacy Policy
Frequently Asked Questions
Ask your question
Entering your question as a complete sentence will provide more accurate results than keywords or phrases.
User questions
FAQs
Category List
FAQs
«
209
210
211
212
213
»
Question
Answer
What is the difference between a 1460 and a 1461 closer?
Resolution:
As of today the 1460 is the closer "series number", and 1461 is the closer "model or ordering # ". Both numbers represent the same door closer, there is no difference.:
What is the holding force of a SEM magnet?
Resolution:
The SEM series magnets have a holding force of approximately 35 lbs when installed according to LCN instructions.:
What are the thermal factors for Steelcraft door products?
Resolution:
All doors are tested in accordance with ASTM C1363 and SDI 113:B18 Series (Steel Stiffeners) U-Factor = 0.50 R-Value = 2.01B16 Series (Steel Sti...:
How does the B511 operate?
Resolution:
B511 (ANSI F109) Entry/Office Lock Turn/push button locking. Pushing and turning button locks outside lever requiring use of key until button is manually unlocked. Push button locki...:
What non IC cam is offered by Schlage to work in a Falcon MA lock?
Resolution:
Price Book 72A List Price $8.10:
Does Schlage offer a 5 pin commercial cylinder?
Resolution:
Schlage commercial offers a true 5-pin brass cylinder part number 22-001. This cylinder is available for the B250, the discontinued H-series and for S200 series prior to February, 2008.:
Can the B560BD be mounted on a 1 3/8" door?
Resolution:
The standard B560BD fits doors from 1 5/8" to 2" but is available for thinner doors.Two ways to allow this lock to fit doors 1 3/8" up to 1-5/8" thick extended equally:Specify 1 3/8" thick door whe...:
What are the part numbers for the mounting posts and screws for an L9000 lock?
Resolution:
Mounting Posts Part Number Door Thickness L583-211 1 3/8" L583-212 1 3/4" - See note section on SL1 trim L583-213 2...:
F-Series Troubleshooting Menu
Resolution:
F-Series Troubleshooting Menu:
F-Series HandPunch Department Code Bug Fix
Resolution:
F-Series HandPunch Department Code Bug Fix:
«
209
210
211
212
213
»