Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Resolution: TX (Tsunami) Enclosure installation:

HandPunch or Handkey II F-Series G-Series Allergen Statement

Resolution: F-Series G-Series Allergen Statement:

What Windows' operating systems are compatible with HandNet for Windows?

Resolution: Handnet for Windows Operating Systems CompatibilityHand Net for Windows has been tested with the following operating systems:· Windows XP Professional Service Pack 2 (US English edition)· Windows X...:

What is the device backset when using a 1790 with a 6111 strike?

Resolution: The Von Duprin 6111 electric strike would work with DOM 1790 device on medium style doors Centerline of the 1790 device mounting screws are located 1 11/16" from face of stop. See d...:

Can I use a 4040 EDA and a Glynn Johnson 100 series concealed stop together?

Resolution: There is not a conflict between the 4041/4040XP EDA door closer and the GJ 100 or 410 overhead concealed series stops. The exception is: the 4041/4040XP mounted on a drop plate, and the Glynn Jo...:

Can 576A or 576B strikes be used on wood doors?

Resolution: The 576A or 576B strikes can be used on wood doors but you should check with door manufacturer if it is a fire-rated door to make sure there are no conflicts.:

How do you order a 4110 hold open spring cush arm only?

Resolution: The 4110 hold open spring Cush (Spring H Cush) arm part number is 4110-3049SCNS.:

What is the difference between a 1460 and a 1461 closer?

Resolution: As of today the 1460 is the closer "series number", and 1461 is the closer "model or ordering # ". Both numbers represent the same door closer, there is no difference.:

What is the holding force of a SEM magnet?

Resolution: The SEM series magnets have a holding force of approximately 35 lbs when installed according to LCN instructions.:

What are the thermal factors for Steelcraft door products?

Resolution: All doors are tested in accordance with ASTM C1363 and SDI 113:B18 Series (Steel Stiffeners) U-Factor = 0.50 R-Value = 2.01B16 Series (Steel Sti...: