Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Does Von Duprin make a keypad lever trim?

Resolution: Von Duprin used to offer a KP992L trim that was operating the 98/99 series exit devices but it was discontinued in mid 1990. Von Duprin does not make a keypad trim any longer.:

What is dual switch monitoring or DS?

Resolution: The DS is Dual Monitor Switch for Von Duprin 6100 and 6200 series electric strikes (not 6300 or 6400)DS option cannot be added to a Von Duprin 6000 series electric strikes in the field. It is only ...:

Can a Glynn Johnson 100 be used with a 1460 regular (pull side) mount?

Resolution: ST-1974 is used to template a 1460 regular arm closer mounted pull with a GJ100 or GJ410 series concealed overhead stop/holder.:

What length SRT screw is used for mounting the body of a 1461 closer?

Resolution: The SRT screw that is used for mounting the 1461 closer body is 1 3/8" long.Four screws are used to mount the closer body.:

Is there a replacement for the Von Duprin 99/98 push pad plate that came off?

Resolution: You need to replace the push bar kit as the push pad plate is not available by itself. :

Is the 8827-F top soffit latch available as a part?

Resolution: The 8827-F soffit latch is available, part number 114141-00.:

Can you mount a 4041 Reg/Pa 180 degrees?

Resolution: Follow the 180° standard installation instructions to allow 180° of door opening. 5" hinge maximum.*Locate closer and shoe from centerline of pivot or swing clear hinge pin when used.:

Can a 1 3/4" thick panel be used in a fire rated transom frame with a transom bar?

Resolution: Transom panels are available in the following constructions: 1 3/4" thick panels with interior construction similar to an L-Series door installed into a frame either Without a transom bar - r...:

What replaced the PS873-K-2-BB?

Resolution: PS914-K-2RS-BBK replaces the old PS873-K-2-BB.:

Why is my PS873 outputting 27 volts?

Resolution: If PS873 power supply provides more than 26.4VDC replace the power supply with PS914 power supply.: