Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

Can the 1/4" GBK Glass Bead Kit shims be stacked to get 1/2"?

Resolution: You can stack two GBK Glass Bead kits if the door is 1 3/4" thick. :

What is the standard voltage for the 6111 electric strike?

Resolution: 24VDC electric strike is the most common and you will receive 24VDC if you do not indicate a voltage when ordered. :

What is the part number for the EAK for my monarch 24/25 device?

Resolution: Exit Alarm Kits are ordered by specifying device Series and size. 24-EAK-3 (part #650163) 24-EAK-4 (part #650164) 25-EAK-3 (part #650167) 25-EAK-4 (part #650168):

Can I use the 8847-F on wood door?

Resolution: The 8847-F is for hollow metal doors only and can not be used on Wood doors.:

Why is the ND85 push button hard to push in?

Resolution: Only affect products shipped prior to April 20th, 2011. Replace the chassis or keycam. :

What is the part number for the lever return spring for an old 182LE trim?

Resolution: These parts are no longer available. For reference the spring part number is 4841 and the clip part number is 4326.:

Old 1981 Schlage Lock Service manual.

Resolution: The 81 service manual can be found here.:

MiFare with Handreader

Resolution: Once you are enrolled on a SmartCard you can use it to access a unit that has been Cold booted (no users in memory) The template and user ID are also stored in the unit -after you are enroll...:

SNMP Ethernet Risk on EN-200 (HandReaders)

Resolution: Please be aware when using network analysis applications, these applications may detect an SNMP Ethernet risk, if the application used assumes the Schlage Ethernet device allows both Read and Write...:

How to understand wiegand format on Handreader

Resolution: A 26 bit Weigand Format is standard. It is one of the selections of the setup menu. The output data transmits from terminals marked Data 1, Data 2 and Ground. The first bit transm...: