Ask your question Entering your question as a complete sentence will provide more accurate results than keywords or phrases.

FAQs

What is the part number for a blank outside rose for the L locks?

Resolution: The blank outside rose part number is 09-508. This part is identical to the standard rose where a plug is installed inside the rose so a small seam is visible. Mounting post...:

AD200 40 Function won't go into privacy

Resolution: Make sure inside cover is on. If the tamper switch is open, the privacy will not engage.:

Does the mortise cylinder in the 19 EAK arm and disarm the EA?

Resolution: The mortise cylinder arms and disarms the EA, see operational steps 12 & 14 of the Exit Alarm instructions:

What does NLOP mean on 98NLOP?

Resolution: NLOP means Night latch optional pull (night latch cylinder assembly with pull by others).:

Is the ALK available on the EL1690?

Resolution: The exit alarm, ALK, is not available for Falcon Doromatic product lines.:

Why are there two different bore sizes on the templates for the B500 and B600 deadbolts?

Resolution: The bore size is dependent on the function of the deadbolt. Some functions can be installed into a 1 1/2" or 2 1/8" bore while others require 1 1/2" only. You need to reference the dead...:

What are door levels and models?

Resolution: Levels and Models (covered in ANSI A250.8 (SDI 100) "Recommended Specifications for Standard Steel Doors and Frames") are SDI term aid in the selection and specification pr...:

What is the part number for the outside trim assembly on L9000 mortise locks?

Resolution: Outside Knob/Lever and Rose/Escutcheon Assemblies Part Number Description A Rose with Knob/Lever 09-506 Designs: 01 02 03 05 06 07 12 17 18 OME 41 42 09-655 Des...:

What is the part # for 98/99 series end cap with bracket?

Resolution: The part number for 98/99 end cap with bracket is 050014-"finish".:

How tall of a door can a standard 98/9947 fit?

Resolution: A standard device mounted at standard templating location will fit up to a 8'4" tall door. Extension rods for non fire rated devices over 10' are available and can be found in&nbs...: